|
1. PROJECT REQUIREMENT
|
-
|
|
|
I. The scope of this project is to deliver, install and test the UTP patch panel of 24 ports to UiTM
|
Ya
Tidak
|
|
|
II. The tenderers need to propose the optimum specification for the equipment to function and integrate well with the existing system. Should any component that needs to be added shall be proposed by the tenderer.
|
Ya
Tidak
|
|
|
III. The tenderer must ensure the availability, operability, reliability, and functionality of the supplied item components to function properly.
|
Ya
Tidak
|
|
|
IV. All other related material, components, and accessories that are required to ensure full operation and integration with new or existing equipment of the patch panel must be provided by the tenderer.
|
Ya
Tidak
|
|
|
V. The tenderer must make sure all works are done properly without any damage to the existing infra/equipment. The tenderer shall be responsible for any damage that occurs.
|
Ya
Tidak
|
|
|
VI. The tenderer must ensure that installations of all UTP patch panels are done by an experienced network technician
|
Ya
Tidak
|
|
|
VII. The installation location will be determined by UiTM from time to time and the tenderer shall be ready to carry out the installation work when the local order is issued.
|
Ya
Tidak
|
|
|
2. PRODUCT REQUIREMENT
|
-
|
|
|
I. The UTP Patch Panel must be equal to or exceed performance requirements specified by the TIA/EIA structured cabling standards.
|
Ya
Tidak
|
|
|
II. The UTP Patch Panel must meet ISO/IEC standards.
|
Ya
Tidak
|
|
|
III. The UTP Patch Panel supplied must be fully populated with a modular jack.
|
Ya
Tidak
|
|
|
IV. The UTP Patch Panel supplied by the tenderer must be in 24 Port RJ45 or better.
|
Ya
Tidak
|
|
|
V. The UTP Patch Panel shall feature optional wire management to secure cable bundles, control and maintain proper cable bend radius and provide physical protection for terminations.
|
Ya
Tidak
|
|
|
VI. The UTP Patch Panel must support the RJ-45 modular plug connector.
|
Ya
Tidak
|
|
|
VII. The UTP Patch Panel must be compatible with the 19-inch equipment racks, cabinets, or wall mount brackets.
|
Ya
Tidak
|
|
|
VIII. The UTP Patch Panel shall have 16-gauge steel metal construction and the modular holder shall be made of UL94V-0 gray or fire-retardant plastic constructions.
|
Ya
Tidak
|
|
|
IX. The UTP Patch Panel shall be in 1U rack space.
|
Ya
Tidak
|
|
|
X. The UTP Patch Panel must be labeled, and the label shall be easily read, long-lasting, and waterproof.
|
Ya
Tidak
|
|
|
3. CATALOGUES / BROCHURES
|
-
|
|
|
I. All related catalogs / brochures shall be provided.
|
Ya
Tidak
|
|
|
4. WARRANTY
|
-
|
|
|
I. The item shall have at least ONE (1) year warranty from the tenderer or manufacturer.
|
Ya
Tidak
|
|
|
II. The tenderer shall be responsible for the installation, test-run, and commissioning of the equipment and accompanying software to the satisfaction of UNIVERSITI TEKNOLOGI MARA before final acceptance. All costs on the installation, commissioning and test run shall be borne by the tenderer during the warranty period.
|
Ya
Tidak
|
|
|
5. PROJECT DELIVERY PERIOD
|
-
|
|
|
I. The delivery period must be within 8 weeks after the tenderer has received the Offer Letter.
|
Ya
Tidak
|
|
|
II. If there is a delay in project delivery, Tenderer must apply for an extension at least 1 month before the delivery period ends.
|
Ya
Tidak
|
|
|
6. IMPORTANT STATEMENT TO TENDERER
|
-
|
|
|
I. Any documents presented or submitted by the tenderer in this Dokumen Teknikal MUST NOT DISCLOSE ANY INFORMATION RELATED TO THE COMPANY'S NAME, LOGO, REGISTRATION NUMBER, ETC. THIS INFORMATION MUST BE ERASED AND NOT BE READABLE.
|
Ya
Tidak
|
|
Loading...