I. Vendors must comply with all the requirements specified in this tender document

II. Vendors must bear all costs of supplying the specified quantity of items to UiTM. Such costs shall include the costs of delivery, installation, commissioning, training, troubleshoot and maintenance work (including parts labour and on-site service) within the specified warranty period

III. Vendors must bear all costs of supplying the specified quantity of items to UiTM. Such costs shall include
the costs of delivery, installation, commissioning, troubleshoot and maintenance work (including parts,
labour and on-site service) within the specified warranty period
The equipment will be distributed in the following Campuses:
1. Electrical Engineering School, College of Engineering, UiTM Shah Alam Selangor x 1 Sets
2. UiTM Penang Branch, Permatang Pauh Campus x 1 Sets

I. GENERAL OVERVIEW:
- Bandwidth: Range from 70 MHz to 200MHz
- Memory depth per channel(max): 2 M points (one- or half-channel operation), 1 M points (three- or four-channel operation)
- Memory: Standard on DSO models (segmented memory)
- Scope display type: 7-inch TFT LCD WVGA display
- Scope Channels: 4 Channel
- Sampling Rate per channel (max): 2 GSa/s (one- or half-channel operation), 1 GSa/s (three- or four-channel operation)

II. TECHNICAL SPECIFICATIONS:
- Calculated rise time (10 to 90%) : Range from ≤ 5 ns ≤1.7ns
- External trigger: Back panel input
- Segmented memory, mask/limit testing, built-in training signals, integrated digital voltmeter, frequency counter: standard
- Waveform update rate: 200,000 waveforms per second
- Waveform math: add, subtract, multiply, divide, FFT (magnitude and phase), low pass filter
- Connectivity: USB 2.0 (host and device), LAN
- Automatic measurements: 14 amplitudes, 14 timing, and 4 pulse count measurements
- Benchvue software that enables the PC control.

III. Acquisition system
Acquisition mode
- Time mode: default mode (normal)
- Roll: Displays the waveform moving across the screen from right to left. Available at the time base settings of 50 ms/div or slower
- Comes with segmented memory with maximum number of segments is 500
- Minimum trigger re-arm time = 1 μs (1,000,000 waveforms/sec in Segmented acquisition mode)
- XY (Displays the volts-versus-volts display): X = Channel 1, Y = Channel 2, Z= External trigger, 1.4 V blanking
- Phase error at 1 MHz: < 0.5 degree

IV. Trigger sensitivity
Internal
- Greater of 0.6 div or 2.5 mV (≤ 10 MHz), 0.9 div or 3.8 mV (10 to 70 MHz) and 1.2 div or 5 mV (70 to 200 MHz)
External
≤ 10 MHz:
- 20 mVpp (1.6 V range)
- 100 mVpp (8 V range)

10 to 200 MHz:
- 100 mVpp (1.6 V range)
- 500 mVpp (8 V range)

V. Trigger level range
Internal
- ± 6 div from center-screen

External
- ± 1.6 V or ± 8 V selectable

VI. CONNECTIVITY
Standard Ports:
- One USB 2.0 hi-speed device port on rear panel. Supports USBTMC protocol
- One USB 2.0 hi-speed host port on front panel. Supports memory devices
- One Ethernet 10/100Base-T port on rear panel

VII. SUPPLIED ACCESSORIES
- come standard with switchable 1:1/10:1 high-impedance passive probes for each channel of the oscilloscope
- localized power cord
- Standard passive probes: 4 probes included
- Standard secure erase

I. Vendors must provide the catalogues / brochures / technical specification manuals with the tender proposal

II. Original copies of user and operational manual of the equipment must be provided

I. Tenderers are required to provide training for the use, maintenance and troubleshoot of the equipment to the Technical Staff & Lecture of Electrical Engineering School, College of Engineering, UiTM Shah Alam and all training-related costs are borne by the tenderers.

II. A minimum of one (1) day training for a minimum of one (1) participant covering each module. (Vendors must provide details/syllabus of the training module)

III. Complete training materials and documentation must be provided to all participants

IV. The training MUST be conducted by trainers who are certified by principal. Please attach the trainer's certification that is certified by principal supplier.

V. Certificate of attendance must be provided

VI. Training sessions must be conducted at the following Campuses:
1. School of Electrical Engineering, College of Engineering, UiTM Shah Alam Selangor
2. UiTM Penang Branch, Permatang Pauh Campus

I. Vendors must have local service for repair services and provide on call services when required by UiTM

II. Vendors must provide details of warranty. INCLUDING ALL parts, labour, basic phone support for hardware issue, repairs onsite). Please attach the Letter of Warranty (LOW) from the principle, which states that UiTM is entitled to 3 years of warranty upon project completion

III. Vendors be responsible for the installation, commissioning and test-run of the equipment and accompanying software (if applicable) to the satisfaction of UNIVERSITI TEKNOLOGI MARA before final acceptance.

IV. All cost on delivery. installation, commissioning and test run shall be borne by the vendor.

V. The vendors MUST provide a genuine product. The vendors must be supported back-to-back by a principle (manufacturer) to provide maintenance services for equipment supplied. The vendors should attach a Letter of Authorization (LOA) from Distributors/ Principal.

VI. Free support through fax, email, telephone must be provided during the warranty period

I. Note that all other related material, components and cabling, which are required to ensure full operation of the above package must be supplied and borne by vendors