|
1. GENERAL REQUIREMENTS
|
-
|
|
|
I. Vendors must comply with all the requirements specified in this tender document.
|
Ya
Tidak
|
|
|
II. Vendors must bear all costs of supplying the specified quantity of items to UiTM. Such costs shall include the costs of delivery, installation, commissioning, training, troubleshoot and maintenance work (including parts labour and on-site service) within the specified warranty period
|
Ya
Tidak
|
|
|
III. Vendors must bear all costs of supplying the specified quantity of items to UiTM. Such costs shall include
the costs of delivery, installation, commissioning, troubleshoot and maintenance work (including parts,
labour and on-site service) within the specified warranty period
The equipment will be distributed in the following Campuses:
1. Electrical Engineering School, College of Engineering, UiTM Shah Alam Selangor x 2 Sets
2. UiTM Penang Branch, Permatang Pauh Campus x 1 Sets
|
Ya
Tidak
|
|
|
2. SPECIFICATION
|
-
|
|
|
I. GENERAL SPECIFICATIONS
- Number of outputs: 3 independents
- Total power: 90 W
- Ripple and noise: <1 mVrms
- Accuracy: 0.05%+10 mV
- Modern connectivity: USB and LAN (LXI Core)
- Display: Minimum 7-inch-wide video graphics array (WVGA)
|
Ya
Tidak
|
|
|
II. PERFORMANCE SPECIFICATIONS:
Power output (90 W)
1) DC Output rating (0 to 40ºC)
- Output 1: 0 to 6 V (voltage), 0 to 5 A (current)
- Output 2: 0 to 30 V (voltage), 0 to 1 A (current)
- Output 3: 0 to 30 V (voltage), 0 to 1 A (current)
|
Ya
Tidak
|
|
|
III. 2) Load regulation ± (% of output + offset)
All 3 outputs
- Voltage: < 0.01% + 2 mV
- Current: < 0.2% + 10 mA
|
Ya
Tidak
|
|
|
IV. 3) Line regulation ± (% of output + offset)
All 3 outputs
- Voltage: < 0.01% + 2 mV
- Current: < 0.2% + 10 mA
|
Ya
Tidak
|
|
|
V. 4) Programming accuracy ± (% of output + offset)
- Output 1: 0.1% + 5 mV (voltage), 0.1% + 10 mA (current)
- Output 2 and 3: 0.05% + 10 mV (voltage), 0.2% + 5 mA (current)
|
Ya
Tidak
|
|
|
VI. 5) Readback accuracy ± (% of output + offset)
- Output 1: 0.1% + 5 mV (voltage), 0.1% + 10 mA (current)
- Output 2 and 3: 0.05% + 10 mV (voltage), 0.2% + 5 mA (current)
|
Ya
Tidak
|
|
|
VII. 6) Load transient recovery time
All 3 outputs
- Voltage settling band: 15 mV
- Time: < 50 Us
|
Ya
Tidak
|
|
|
VIII. 7) Readback remote
- Output 1: 0.5 mV (voltage), 1 mA (current)
- Output 2: 1.5 mV (voltage), 0.5 mA (current)
- Output 3: 1.5 mV (voltage), 0.5 mA (current)
|
Ya
Tidak
|
|
|
IX. 8) Programming front panel
All 3 outputs
-Voltage: 1 mV
- Current: 1 Ma
|
Ya
Tidak
|
|
|
X. 9) Readback front panel
All 3 outputs
- Voltage: 1 mV
- Current: 1 Ma
|
Ya
Tidak
|
|
|
XI. 10) Output ripples and noise (20 Hz to 20 MHz)
All 3 outputs
- Normal mode voltage: <1mVrms/5mVpp
- Normal mode current: < 4 mArms
|
Ya
Tidak
|
|
|
XII. 11) Overvoltage protection (OVP) ± (% of output + offset)
All 3 outputs
Programming accuracy: 0.2% + 0.4V
|
Ya
Tidak
|
|
|
XIII. 12) Activation time (average time for the output to start to drop after OVP or OCP condition occurs)
- Overvoltage (OVP): < 5 ms
- Overcurrent (OCP): < 5 ms
|
Ya
Tidak
|
|
|
XIV. 13) Command processing time: < 10 ms
|
Ya
Tidak
|
|
|
XV. 14) Programming temperature coefficient per ºC (% of output + offset)
- Output 1: 0.0005% +0.1 mV (voltage), 0.0002% +0.05 mV (current)
- Output 2 and 3: 0.002% +0.5 mV (voltage), 0.0001% +0.02 mV (current)
|
Ya
Tidak
|
|
|
XVI. 15) Readback temperature coefficient per ºC (% of output + offset)
- Output 1: 0.0005% +0.1 mV (voltage), 0.0002% +0.05 mV (current)
- Output 2 and 3: 0.002% +0.5 mV (voltage), 0.0001% +0.02 mV (current)
|
Ya
Tidak
|
|
|
XVII. 16) Up/down programming settling time to within 1% of the total excursion
All 3 outputs
- Up full load: 80 ms
- Up no load: 80 ms
- Down full load: 60 ms
- Down no lod: 500 ms
|
Ya
Tidak
|
|
|
XVIII. 17) Others
- Dimensions (HxWxD): 164.7 mm x 313.6 mm x 240.9 mm (6.48 in x 12.35 in x 9.48 in)
- Weight: 9.85 kg
|
Ya
Tidak
|
|
|
XIX. SUPPLIED ACCESSORIES
- Test leads
- AC power cord, Banana plug, single sheathed to alligator clip
|
Ya
Tidak
|
|
|
3. CATALOGUES / BROCHURES
|
-
|
|
|
I. Vendors must provide the catalogues / brochures / technical specification manuals with the tender proposal.
|
Ya
Tidak
|
|
|
II. Original copies catalogue of user, brochure, operational manual and clear technical specification of the equipment must be provided
|
Ya
Tidak
|
|
|
III. The equipment offered by vendor must be of the latest available model.
|
Ya
Tidak
|
|
|
4. TRAINING
|
-
|
|
|
I. Tenderers are required to provide training for the use, maintenance and troubleshoot of the equipment to the Technical Staff & Lecture of Electrical Engineering School, College of Engineering, UiTM Shah Alam and all training-related costs are borne by the tenderers.
|
Ya
Tidak
|
|
|
II. A minimum of one (1) day training for a minimum of one (1) participants covering each module. (Vendors must provide details/syllabus of the training module)
|
Ya
Tidak
|
|
|
III. Complete training materials and documentation must be provided to all participants
|
Ya
Tidak
|
|
|
IV. The training MUST be conducted by trainers who are certified by principal. Please attach the trainer's certification that is certified by principal supplier.
|
Ya
Tidak
|
|
|
V. Certificate of attendance must be provided
|
Ya
Tidak
|
|
|
VI. Training sessions must be conducted at the following Campuses:
1. School of Electrical Engineering, College of Engineering, UiTM Shah Alam Selangor
2. UiTM Penang Branch, Permatang Pauh Campus
|
Ya
Tidak
|
|
|
5. WARRANTY AND SUPPORT
|
-
|
|
|
I. Warranty for the equipment is expected to be at least One (1) year warranty.
|
Ya
Tidak
|
|
|
II. Installation, maintanance, testing and commissioning of the entire system should be completed within (12) week from the delivery date.
|
Ya
Tidak
|
|
|
III. Vendors must have local service for repair services and provide on call services when required by UiTM
|
Ya
Tidak
|
|
|
IV. Vendors must provide details of warranty. INCLUDING ALL parts, labour, basic phone support for hardware issue, repairs onsite) Please attach the Letter of Warranty (LOW) from the principle, which states that UiTM is entitled to 3 years of warranty upon project completion
|
Ya
Tidak
|
|
|
V. Vendors be responsible for the installation, commissioning and test-run of the equipment and accompanying software (if applicable) to the satisfaction of UNIVERSITI TEKNOLOGI MARA before final acceptance.
|
Ya
Tidak
|
|
|
VI. All cost on delivery. installation, commissioning and test run shall be borne by the vendor
|
Ya
Tidak
|
|
|
VII. The vendors MUST provide a genuine product. The vendors must be supported back-to-back by a principle (manufacturer) to provide maintenance services for equipment supplied. The vendors should attach a Letter of Authorization (LOA) from Distributors/ Principal.
|
Ya
Tidak
|
|
|
VIII. Free support through fax, email, telephone must be provided during the warranty period
|
Ya
Tidak
|
|
|
6. OTHER REQUIREMENTS
|
-
|
|
|
I. Note that all other related material, components and cabling, which are required to ensure full operation of the above package must be supplied and borne by vendors
|
Ya
Tidak
|
|
Loading...