ADS-SHR-DOC-SPECTECH
  • UiTM/W1/PER/SHR/B/0725/0004
  • CADANGAN MEMBEKAL,MENGHANTAR DAN MENGUJILARI PERALATAN MAKMAL KE FAKULTI KEJURUTERAAN ELEKTRIK UiTM CAWANGAN SARAWAK,KAMPUS SAMARAHAN
  • Signal / Function Generator
  • Function Generator
  • 6 Unit

Maklumat Spesifikasi Teknikal

  
Keterangan Calit Tawaran/Catatan
1.
  • Maximum Five Output Channels
  • - 2 Equivalent Performance Arbitrary Channels Frequency : 1μHz~60MHz
  • - RF Channel Frequency (FG/ARB/MOD) : 160MHz
  • - Pulse Generator Frequency : 25MHz
  • True Point by Point Output Arbitrary Waveform Function
  • Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis
  • Frequency Counter : 150MHz, 8 bits Frequency Resolution


 Ya

Tidak
2. Arbitrary Functions
ARB function Built-in
Sample Rate 200 MSa/s
Repetition Rate 100MHz
Waveform Length 16k points
Amplitude Resolution 14 bits
Non-Volatile Memory 10sets 16k points(1)
User-defined output section From point 2~16384
User-defined output marker section From point 2 ~ 16384

Frequency Characteristics
Range Sine 60MHz(max)
Square 25MHz(max)
Triangle, Ramp 1MHz
Resolution 1μHz
Accuracy Stability ±20 ppm
Aging ±1 ppm, per 1 year
Tolerance ≤1μHz

Output Characteristics
Amplitude Range 1mVpp to 10 Vpp (into 50Ω)
2mVpp to 20 Vpp (open-circuit)
Accuracy ±2% of setting
±1 mVpp (at 1 kHz/into 50Ω without DC offset)
Resolution 0.1mV or 4 digits
Flatness ± 1% (0.1dB) ?1MHz
± 3% (0.3dB) ?50 MHz
± 16% (1.5dB) ?60MHz(6)
(sinewave relative to 1 kHz/into 50Ω)
Units Vpp, Vrms, dBm

Offset
Range ±5 Vpk AC +DC (into 50Ω)
±10Vpk AC +DC (Open circuit)
Accuracy ±(1% of setting + 5mV+ 0.5% of amplitude)

Waveform Output
Impedance 50Ω typical (fixed);
> 10MΩ (output disabled)
Protection Short-circuit protected
Overload relay automatically disables main output
Ground Isolation 42Vpk max


 Ya

Tidak
I. Sync Output
Range TTL-compatible into>1kΩ
Impedance 50Ω standard
Ground Isolation 42Vpk max

Sine wave Characteristics
Harmonic distortion -60 dBc DC?200kHz, Ampl>0.1 Vpp
–55 dBc 200kHz?1 MHz, Ampl>0.1 Vpp
–45 dBc 1MHz?10 MHz, Ampl?0.1Vpp
–35 dBc 10MHz?30MHz, Ampl?0.1Vpp
-27 dBc 30MHz?60MHz, Ampl?0.1Vpp
Total harmonic distortion < 0.1% (Ampl>1Vpp) DC~100 kHz

Square wave Characteristic
Rise/Fall Time <15ns
Overshoot <5%
Asymmetry 1% of period +5 ns
Variable duty Cycle 0.01% to 99.99%(limited by the current frequency setting)
Jitter 20ppm+500ps(4)

Ramp Characteristics
Linearity < 0.1% of peak output
Variable Symmetry 0% to 100%

Pulse Characteristics
Frequency 1uHz~25MHz
Pulse Width ?20nS(limited by the current frequency setting)
Variable duty Cycle 0.01%~99.99%(limited by the current frequency setting)
Overshoot <5%
Jitter 20ppm +500ps(4)

Pulse Generator
Amplitude 1mVpp to 2.5 Vpp (into 50Ω)
2mVpp to 5 Vpp (open-circuit)
Offset ±1 Vpk ac +dc (into 50Ω)
±2Vpk ac +dc (Open circuit)
Frequency 1uHz~25MHz
Pulse Width 20ns~999.7ks(limited by the current frequency setting)
Ya

Tidak
II. Variable duty Cycle 0.1%~99.9%(limited by the current frequency setting)
Leading and Trailing Edge Time(5) 10ns~ 20s(1ns resolution) (limited by the current frequency and pulse width settings)
Overshoot <5%
Jitter 100ppm +500ps(4)

RF Generator
Arbitrary Functions
ARB function Built-in
Sample Rate 200 MSa/s
Repetition Rate 100MHz
Waveform Length 16k points
Amplitude Resolution 14 bits
User-defined output section From point 2~16384
Jitter 20ppm +5ns

Frequency Characteristics
Range Sine 1uHz~160MHz
Square 25MHz(max)
Triangle, Ramp 1MHz
Resolution 1μHz
Accuracy Stability ±20 ppm
Aging ±1 ppm, per 1 year
Tolerance ≤1μHz

Output Characteristics
Amplitude(into 50Ω) 1mVpp to 2 Vpp
Accuracy ±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset)
Resolution 1mV or 3 digits
Flatness ± 1% (0.1dB) ?1MHz
± 3% (0.3dB) ?50 MHz
± 10% (0.9dB) ?160MHz
± 35% (3.5dB) ?320MHz (sinewave relative to 1 kHz/into 50Ω)
Offset ±1 Vpk AC +DC (into 50Ω)
±2Vpk AC +DC (Open circuit)

Waveform Output
Impedance 50Ω typical (fixed)
> 10MΩ (output disabled)


 Ya

Tidak
III. Sine wave Characteristics
Harmonic distortion –60 dBc DC?200kHz, Ampl>0.1 Vpp
–55 dBc 200kHz?1 MHz, Ampl>0.1 Vpp
–45 dBc 1MHz?10 MHz, Ampl?0.1Vpp
–30 dBc 10MHz?320MHz, Ampl?0.1Vpp
Total harmonic distortion < 0.1% (Ampl>1Vpp) DC~100 kHz

Square wave Characteristics
Rise/Fall Time <15ns
Overshoot <5%
Asymmetry 1% of period +5 ns
Variable duty Cycle 0.01% to 99.99%(limited by the current frequency setting)
Jitter 20ppm+500ps(4)

Ramp Characteristics
Linearity < 0.1% of peak output
Variable Symmetry 0% to 100%

Modulation/Sweep
Modulation Type AM,FM,PM,FSK,PWM (The detail same as CH1 modulation specification)
Sweep type Frequency
Modulating Frequency Sine-DDS 5us~327.68ms(Resolution:5us)
Sine-ARB 2mHz to 20kHz(Resolution:1mHz)

Save/Recall 10 Groups of Setting Memories
Interface LAN, USB
Display 4.3’’ TFT LCD
480 × 3 (RGB) × 272
Power Source AC100~240V, 50~60Hz or
AC100~120V, AC220~240V, 50~60Hz
Accessories GTL-101× 1(MFG-21XX)
Quick Start Guide ×1
CD (user manual + software) ×1
Power cord×1
Ya

Tidak
3. Accessories: BNC-Alligator Test Lead
 Ya

Tidak