|
1. General
|
-
|
|
|
I.
- Bandwidth: 100 MHz
- Channels: 2-channel
- Sample Rate: 1 GS/s sample rate on all channels
- Record Length: 20k point record length on all channels
|
Ya
Tidak
|
|
|
II.
- Advanced triggers include pulse, runt, and line triggers
- 7-inch WVGA color display with 15 horizontal divisions that shows 50% more signal
- 32 automated measurements
- Dual window FFT with simultaneous time and frequency domain views
- Trigger frequency counter
- Pan and Zoom capability
- Multi-language user interface with support for 10 languages in the user interface and front panel overlay
- Small footprint and light weight
- Fanless design contributes to low noise operation
|
Ya
Tidak
|
|
|
III.
- USB 2.0 host port on the front panel for quick and easy data storage.
- USB 2.0 device port on rear panel to connect to a PC and remotely control the instrument
- Probe Compensator: Amplitude 5 V & Frequency 1 KHz
- Provides helpful on-screen tips for users
- Built-in oscilloscope handbook provides operating instructions and oscilloscope fundamentals
- Integrated courseware feature provides lab exercise guidance on the display
- Autoset, Cursors, and Automated measurements can be disabled to help educators to teach basic concepts to students
|
Ya
Tidak
|
|
|
2. Vertical system
|
-
|
|
|
I.
- Vertical resolution: 8 bits
- Input sensitivity range: 1 mV/div to 10 V/div max. in 1-2-5 sequence with probe attenuation set to 1X
- DC gain accuracy: ±3.0 % step gain, derated at 0.1 %/°C above 30 °C
- Maximum Input Voltage: 300 VRMS, Installation Category II; derate above 4 MHz at 20 dB per decade to 200 MHz
- Offset range: 1 mV/div to 50 mV/div: ± 1 V, 100 mV/div to 500 mV/div: ± 10 V, 1 V/div to 5 V/div : ± 100 V
- Bandwidth limit: 20 MHz (Typ)
- Input coupling: DC, AC
- Input impedance: 1 M ohm ±2 % in parallel with 14 pF ±2 pF
- Vertical zoom: Vertically expand or compress a live or stopped waveform
- Peak Detect: Captures glitches as narrow as 4 nsec at all sweep speeds.
- Average: From 2 to 256 waveforms included in average.
- Hi-Resolution: Averages multiple sample of one acquisition interval into one waveform point.
- Roll: Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div
|
Ya
Tidak
|
|
|
3. Horizontal system
|
-
|
|
|
I.
- Timebase accuracy: ±25 x 10-6 over any >1 ms interval
- Timebase range: 2 ns/div to 100 sec/div in a 1-2-4 sequence
- Horizontal zoom: Horizontally expand or compress a live or stopped waveform
- Deskew range: ± 100 nsec
|
Ya
Tidak
|
|
|
4. Trigger system
|
-
|
|
|
I.
- External trigger input: Included
- Trigger modes: Auto, Normal, Single Sequence
- Trigger Types (Edge): Positive or negative slope on any channel. Coupling includes DC, HF reject, LF reject, and noise reject.
- Trigger Types (Pulse Width): Trigger on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time.
- Trigger Types (Runt): Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again
- Trigger source: CH1, CH2, AUX IN, AC Line
- Trigger Coupling: DC, Noise Reject, High Frequency Reject, Low Frequency Reject
- Trigger signal frequency readout: Provides a frequency readout of the trigger source up to instrument bandwidth
|
Ya
Tidak
|
|
|
5. Waveform measurements
|
-
|
|
|
I.
- Cursors: Time, Amplitude, Screen
- Automated measurements: 32, of which up to six can be displayed on-screen at any one time. Measurements include: Period, Frequency, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase,
- Positive Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle
- RMS, Positive Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area, Cycle Area, Delay FR,
- Delay FF, Delay FR, and Delay RR.
- Gating: Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, between waveform cursors or full record length
|
Ya
Tidak
|
|
|
6. Waveform math
|
-
|
|
|
I.
- Arithmetic: Add, Subtract, and Multiply waveforms
- FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming,
- Hanning, or Blackman-Harris.
|
Ya
Tidak
|
|
|
7. Display system
|
-
|
|
|
I.
- Display Type: 7-inch TFT Color Display
- Display Resolution: 800 horizontal by 480 vertical displayed pixels (WVGA)
- Waveform styles: Vectors, Variable persistence, and Infinite persistence.
- Format: YT and XY
|
Ya
Tidak
|
|
|
8. Supplied Accessories
|
-
|
|
|
I.
- Probe set Per Unit
- AC Plug Per Unit
|
Ya
Tidak
|
|
|
9. Manual and Documentation
|
-
|
|
|
I. Original copies of user and operational manual of the equipment must be provided
|
Ya
Tidak
|
|
|
10. Installation , Testing and Commissioning
|
-
|
|
|
I.
- Tenderers is required to install and commissioning the proposed equipment in the specified laboratory location in Fakulty Electrical Engineering by their qualified trainers.
- Installation, testing and commissioning of the entire system should be completed within one month from the delivery date.
|
Ya
Tidak
|
|
|
11. Training
|
-
|
|
|
I. Tenderers are required to provide training for the use, maintenance and troubleshoot of the equipment to the Technical Staff & Lecture of Electrical Engineering and all training-related costs are borne by the tenderers
|
Ya
Tidak
|
|
Loading...