|
1. PROJECT REQUIREMENT
|
-
|
|
|
I. A total number of Access Switch and location Please refer to UiTM Staff for detailed.
|
Ya
Tidak
|
|
|
II. Tenderer MUST ensure all switches installation and configuration done by professional engineer. Notes: Please attach engineer Certification and CV
** PLEASE DO NOT DISCLOSE ANY INFORMATION RELATED TO THE COMPANY'S NAME, LOGO, REGISTRATION NUMBER, ETC. THIS INFORMATION MUST BE ERASED AND NOT BE READABLE.
|
Ya
Tidak
|
|
|
III. Tenderer MUST document all switches configuration, Management IP address and location in hard copy,sofcopy and MUST submit to UiTM.
|
Ya
Tidak
|
|
|
IV. Tenderer MUST proposed and provide genuine product. Please attach the Authorized Letter (LOA) from principle.
** PLEASE DO NOT DISCLOSE ANY INFORMATION RELATED TO THE COMPANY'S NAME, LOGO, REGISTRATION NUMBER, ETC. THIS INFORMATION MUST BE ERASED AND NOT BE READABLE.
|
Ya
Tidak
|
|
|
V. Tenderer shall ensure the product MUST be a new product and had been in the market for less than 18 months.
|
Ya
Tidak
|
|
|
VI. Tenderer must ensure every switch install is labeled properly with high quality, waterproof and long-lasting.
|
Ya
Tidak
|
|
|
VII. The tenderer shall be responsible for the installation, test-run and commissioning of the equipment and accompanying software to the satisfaction of UNIVERSITI TEKNOLOGI MARA before final acceptance. All costs on installation, commissioning and test run shall be borne by tenderer during the warranty period.
|
Ya
Tidak
|
|
|
VIII. Maintenance support is needed during and after the warranty period. Tenderers must provide details of addresses of locations of after sales service centers that shall be responsible for maintenance work for these items during the warranty period.
|
Ya
Tidak
|
|
|
IX. Free support through fax, email, telephone must be provided during the warranty period.
|
Ya
Tidak
|
|
|
X. A maximum of 4 hours response time to attend to problem call on breakdown of equipment or component is to abide by the tenderer.
|
Ya
Tidak
|
|
|
XI. The tenderer shall prepare a complete and comprehensive commissioning report in a form of hardcopy and softcopy after delivery, installation, and testing to ensure the item and accompanying software or the whole package has adhered to the satisfaction of UNIVERSITI TEKNOLOGI MARA before the final acceptance.
|
Ya
Tidak
|
|
|
XII. The comprehensive commissioning report must include the User Acceptance Test. The tenderer must also include other additional documents as proof if requested by UiTM.
|
Ya
Tidak
|
|
|
2. PORT INTERFACES REQUIREMENT
|
-
|
|
|
I. The Switch MUST support at least twenty four (24) 10/100/1000Mbps Ports with full Power Over Ethernet (POE+) for down link interfaces
|
Ya
Tidak
|
|
|
II. The Switches MUST support at least Four (4) 1000Mbps SFP ports for Up link interfaces.
|
Ya
Tidak
|
|
|
III. Access Switches must be support both IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30W per port)
|
Ya
Tidak
|
|
|
3. MEMORY
|
-
|
|
|
I. The Switches shall support minimum 512MB DRAM
|
Ya
Tidak
|
|
|
II. The Switches shall support minimum 256MB Flash memory
|
Ya
Tidak
|
|
|
4. SWITCHING PERFORMANCE
|
-
|
|
|
I. The Switches shall support minimum 56Gbps switching bandwith.
|
Ya
Tidak
|
|
|
II. The Switches shall support at least Forwarding Rate : 41.67 Mpps
|
Ya
Tidak
|
|
|
III. The Switches shall configurable minimum up to 16,000 Unicast MAC adresses
|
Ya
Tidak
|
|
|
IV. The Switches shall configurable minimum up to 1024 IPv4 multicast routes and IGMP groups
|
Ya
Tidak
|
|
|
V. The Switches shall support minimum 256 active VLANs and minimum 4094 VLAN IDs
|
Ya
Tidak
|
|
|
5. NETWORK SECURITY
|
-
|
|
|
I. The Switches shall support 802.1X features to control access to the network
|
Ya
Tidak
|
|
|
II. The Switches shall support Multidomain Authentication to allow an IP phone and a PC to authenticate on the same switch port while being placed on appropriate voice and data VLANs.
|
Ya
Tidak
|
|
|
III. The Switches shall support Access Control List (ACL) for IPv6 and IPv4 security and Quality of Services (QoS).
|
Ya
Tidak
|
|
|
IV. The Switches shall support Port-based ACLs for Layer 2 interfaces to allow security policies to be applied on individual switch ports.
|
Ya
Tidak
|
|
|
V. The Switches shall support BPDU guard to shut down spanning-tree PortFast-enabled interfaces when BPDUs are received to avoid accidental topology loops.
|
Ya
Tidak
|
|
|
VI. The Switches shall support basic Layer 3 features such as RIP and Static Routing.
|
Ya
Tidak
|
|
|
6. SWITCH MANAGEMENT
|
-
|
|
|
I. The Switches support SSH, Kerberos, and SNMPv3 to provide network security by encrypting administrator traffic during Telnet and SNMP sessions
|
Ya
Tidak
|
|
|
II. The Switches support TACACS+ and RADIUS authentication to facilitate centralized control of the switch and restrict unauthorized users from altering the configuration.
|
Ya
Tidak
|
|
|
III. The Switch support console port at RJ45-Ethernet, USB-Mini B and USB-A port for storage and Bluetooth console.
|
Ya
Tidak
|
|
|
7. TECHNICAL/OPERATING MANUAL, ENGINEERING SERVICES AND OTHER ACCESSORIES
|
-
|
|
|
I. User operating/technical manual shall be provided
|
Ya
Tidak
|
|
|
II. All necessary adapters, cables and other accessories required shall be provided
|
Ya
Tidak
|
|
|
8. CATALOGUE/BROCHURES
|
-
|
|
|
I. All related catalogue/brochure shall be provided
|
Ya
Tidak
|
|
|
9. WARRANTY
|
-
|
|
|
I. One (1) years of maintenance support consists of equipment faulty replacement (Next Business Day) and software upgrade shall be provided. Response time to attend to a problem call breakdown of equipment or component is MAXIMUM 4 hours.
Please provide Letter of Warranty (LoW) from principle.
** PLEASE DO NOT DISCLOSE ANY INFORMATION RELATED TO THE COMPANY'S NAME, LOGO, REGISTRATION NUMBER, ETC. THIS INFORMATION MUST BE ERASED AND NOT BE READABLE.
|
Ya
Tidak
|
|
|
II. Must include Enhanced Limited Lifetime Warranty (E-LLW) and In the event of discontinuance of product manufacture, warranty support is limited to 5 years from the announcement of discontinuance.
|
Ya
Tidak
|
|
|
10. DELIVERY PERIOD
|
-
|
|
|
I. Delivery period must be within 18 weeks after tenderer has received the Offer Letter
|
Ya
Tidak
|
|
|
II. If there is a delay in project delivery, Tenderer must apply for extension at least 1 month before the delivery period ends.
|
Ya
Tidak
|
|
Loading...