|
1. PROJECT REQUIREMENT
|
-
|
|
|
I. The proposed item must be new product and not refurbished or OEM product.
|
Ya
Tidak
|
|
|
II. Tenderer must ensure the availability, operability, reliability and functionality of the supplied item components to function properly.
|
Ya
Tidak
|
|
|
III. All other related material, components, cabling and accessories which are required to ensure full operation and integration with new or existing equipment of the item must be provided by the tenderer.
|
Ya
Tidak
|
|
|
IV. Tenderer needs to propose the optimum specification for the equipment to function and integrate well with the existing system. Should any component that needs to be added shall be proposed by the tenderer.
|
Ya
Tidak
|
|
|
V. All proposed software must be complete a working model with educational licensing and discounts and must be a GENUINE COPY (if any).
|
Ya
Tidak
|
|
|
2. PRODUCT REQUIREMENT
|
-
|
|
|
I. The access switch shall meet Standard and Protocol by IEEE organization such as IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab and etc.
|
Ya
Tidak
|
|
|
II. The access switch shall support with at least 24 ports downlink with 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX).
|
Ya
Tidak
|
|
|
III. The access switch shall support 24 PoE++ Ports (RJ45) with 802.3at/af compliant and support 384W power supply.
|
Ya
Tidak
|
|
|
IV. The access switch shall support at least 4 x 1000Mbps SFP Slots for uplink. Uplink also can support multi brand SFP transceiver.
|
Ya
Tidak
|
|
|
V. The access switch shall support at least 1 console port and 1 micro-USB console port for management, configuration and troubleshooting purposes.
|
Ya
Tidak
|
|
|
VI. The access switch shall support network media such as 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m), 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) and 1000BASE-X: Multi-Mode Fiber, Single-Mode Fiber.
|
Ya
Tidak
|
|
|
VII. The access switch support at least 2 fans (external or build-in) to protect switch from overheat.
|
Ya
Tidak
|
|
|
VIII. The access switch shall support at least 100~240VAC with 50/60Hz power supply.
|
Ya
Tidak
|
|
|
IX. The access switch shall support better performance such as:
- Support at least 56Gbps Switching Capacity.
- Support at least 41.7Mpps packet forwarding rate.
- Support at least 9KB Jumbo frame.
|
Ya
Tidak
|
|
|
X. The switch shall support software features such as:
- The switch shall support features such as:802.1p CoS/DSCP priority with 8 priority Queue scheduling: SP, WRR, SP+WRR Port/Flow- based Rate Limiting Voice VLAN.
- Support L2 and L2+ Features such as static routing, DHCP Relay, DHCPServer, IGMP Snooping V1/V2/V3, 802.3ad LACP. STP/RSTP/MSTP, BPDU Filtering/Guard, TC/Root Protect, Loopback Detection, 802.3x Flow Control and L2PT.
- Supports up to 4000 VLANs simultaneously, 802.1Q/MAC/Protocol-based/Private VLAN and GARP/GVRP.
- Support basic ACL like L2~L4 package filtering based on source and destination MAC address, IP address, TCP/UDP ports, 802.1p,DSCP, and protocol.
- Support basic security like IP-MAC-Port Binding, AAA, 802.1x and Radius Authentication, DoS Defend, Dynamic ARP Inspection (DAI), SSH v1/v2, SSL v3/TLS v1, Port Security and Broadcast/Multicast/Unknown-unicast Storm Control.
- Support basic requirement IPV6 features and IPV6 applications such.
- Support management such as Web-based GUI and CLI management, SNMP v1/v2c/v3, MIBs, RMON (1, 2, 3, 9 groups), CPU Monitoring, Port Mirroring, Time Setting: SNTP, and Firmware Upgrade:TFTP & Web
|
Ya
Tidak
|
|
|
3. TECHNICAL/OPERATING MANUAL, ENGINEERING SERVICES AND OTHER ACCESSORIES.
|
-
|
|
|
I. The comprehensive commissioning report must include the User Acceptance Test and Delivery Order" The tenderer must also include other additional documents as proof if requested by UiTM. II. All necessary adapters, cables, and accessories required shall be provided to make sure this project is well function.
|
Ya
Tidak
|
|
|
II. Tenderer must ensure all switches installation and configuration are done by professional person. Note: Please attach Engineer Certification and Co-curriculum Vitae (CV). **PLEASE DO NOT DISCLOSE ANY INFORMATION RELATED TO THE COMPANY'S NAME, LOGO, REGISTRATION NUMBER, ETC. THIS INFORMATION MUST BE ERASED AND NOT BE READABLE.
|
Ya
Tidak
|
|
|
III. Tenderer must proposed and provide genuine product. Note: Please attach the Letter of Authorization (LOA) from Principle.**PLEASE DO NOT DISCLOSE ANY INFORMATION RELATED TO THE COMPANY'S NAME, LOGO, REGISTRATION NUMBER, ETC. THIS INFORMATION MUST BE ERASED AND NOT BE READABLE.
|
Ya
Tidak
|
|
|
IV. Please attach the Letter of Warranty (LOW) from the principle, which states that UiTM is entitled to 3 years of warranty upon project completion.
|
Ya
Tidak
|
|
|
4. CATALOGUE/BROCHURES.
|
-
|
|
|
I. All related catalogues/brochures must be provided.
|
Ya
Tidak
|
|
|
5. WARRANTY AND SUPPORT.
|
-
|
|
|
I. Minimum THREE (3) year of maintenance support consists of equipment faulty replacement (Next Business Day) and software upgrade shall be provided.
|
Ya
Tidak
|
|
|
II. Support Limited Life time Warranty.
|
Ya
Tidak
|
|
|
III. Free support through fax, email, telephone must be provided during the warranty period.
|
Ya
Tidak
|
|
|
IV. Response time to attend to a problem call breakdown of equipment or component is MAXIMUM 4 hours.
|
Ya
Tidak
|
|
|
6. DELIVERY PERIOD.
|
-
|
|
|
I. Delivery period must be within 18 weeks after tenderer has received the Local Order.
|
Ya
Tidak
|
|
|
II. If there is a delay in project delivery, Tenderer must apply for extension at least 1 month before the delivery period ends.
|
Ya
Tidak
|
|
|
7. OTHERS:
|
-
|
|
|
I. Any documents presented or submitted by the tenderer in this Dokumen Teknikal MUST NOT DISCLOSE ANY INFORMATION RELATED TO THE COMPANY'S NAME, LOGO, REGISTRATION NUMBER, ETC. THIS INFORMATION MUST BE ERASED AND NOT BE READABLE.
|
Ya
Tidak
|
|
Loading...