|
1. PROJECT REQUIREMENT
|
-
|
|
|
I. Tenderer MUST ensure all switches installation, configuration and implementation MUST be done by engineer/s with appropriate certification. Please attach copy of certificates.** PLEASE DO NOT DISCLOSED COMPANY INFORMATION BY ERASING THE INFORMATION RELATED TO COMPANY (NAME, LOGO, REGISTRATION NUMBER, ETC)
|
Ya
Tidak
|
|
|
II. Tenderer MUST document all switches configuration, Management IP address and location in hard copy and MUST submit to UiTM.
|
Ya
Tidak
|
|
|
III. Tenderer MUST proposed and provide genuine product. The tenderer should attach a Letter of Authorization (LOA) from Distributors / Principal. This document must be presented in the Dokumen Teknikal. ** PLEASE DO NOT DISCLOSED COMPANY INFORMATION BY ERASING THE INFORMATION RELATED TO COMPANY (NAME, LOGO, REGISTRATION NUMBER, ETC)
|
Ya
Tidak
|
|
|
IV. Tenderer shall ensure the product MUST be a new product and had been in the market for less than 18 months.
|
Ya
Tidak
|
|
|
V. The switch must provide System Health Check feature such as temperature, fan status and power voltage monitoring.
|
Ya
Tidak
|
|
|
2. PORT INTERFACES REQUIREMENT
|
-
|
|
|
I. The Switch MUST support at least forty-eight (48) 10/100/1000Mbps Ports for down link interfaces.
|
Ya
Tidak
|
|
|
II. The Switches MUST support at least Four (4) 1000Mbps SFP ports for Up link interfaces.
|
Ya
Tidak
|
|
|
3. MEMORY
|
-
|
|
|
I. The Switches shall support minimum 512MB DRAM.
|
Ya
Tidak
|
|
|
II. The Switches shall support minimum 256MB Flash memory.
|
Ya
Tidak
|
|
|
4. SWITCHING PERFORMANCE
|
-
|
|
|
I. The Switches shall support 104Gbps switching fabric.
|
Ya
Tidak
|
|
|
II. The Switches shall support at least Forwarding Rate : 70.00 Mpps.
|
Ya
Tidak
|
|
|
III. The Switches shall configurable up to 16,000 Unicast MAC addresses.
|
Ya
Tidak
|
|
|
IV. The Switches shall configurable up to 1024 IPv4 multicast routes and IGMP groups.
|
Ya
Tidak
|
|
|
V. The switch shall support 256 active VLANs and 4094 VLAN IDs.
|
Ya
Tidak
|
|
|
5. NETWORK SECURITY
|
-
|
|
|
I. The Switches shall support 802.1X features to control access to the network.
|
Ya
Tidak
|
|
|
II. The Switches shall support Multidomain Authentication to allow an IP phone and a PC to authenticate on the same switch port while being placed on appropriate voice and data VLANs.
|
Ya
Tidak
|
|
|
III. The Switches shall support Access Control List (ACL) for IPv6 and IPv4 security and Quality of Services (QoS).
|
Ya
Tidak
|
|
|
IV. The Switch shall support Port-based ACLs for Layer 2 interfaces to allow security policies to be applied on individual switch ports.
|
Ya
Tidak
|
|
|
V. The Switch shall support BPDU guard to shut down spanning-tree Port Fast-enabled interfaces when BPDUs are received to avoid accidental topology loops.
|
Ya
Tidak
|
|
|
6. SWITCH MANAGEMENT
|
-
|
|
|
I. The Switches support SSH, Kerberos, and SNMPv3 to provide network security by encrypting administrator traffic during Telnet and SNMP sessions.
|
Ya
Tidak
|
|
|
II. The Switches support TACACS+ and RADIUS authentication to facilitate centralized control of the switch and restrict unauthorized users from altering the configuration.
|
Ya
Tidak
|
|
|
III. The Switch support console port at least RJ45-Ethernet, or USB-Mini B
|
Ya
Tidak
|
|
|
7. TECHNICAL/OPERATING MANUAL, ENGINEERING SERVICES AND OTHER ACCESSORIES
|
-
|
|
|
I. User operating/technical manual shall be provided by the tenderer.
|
Ya
Tidak
|
|
|
II. All necessary adapters, cables and other accessories required shall be provided by the tenderer.
|
Ya
Tidak
|
|
|
8. CATALOGUES/BROCHURES
|
-
|
|
|
I. All related catalogue/brochure shall be provided by the tenderer.
|
Ya
Tidak
|
|
|
9. INSTALLATION, TESTING AND COMMISSIONING
|
-
|
|
|
I. The tenderer is required to perform the installation, testing & commissioning on-site for the supplied item at the location specified by UiTM.
|
Ya
Tidak
|
|
|
II. The comprehensive commissioning report must include the User Acceptance Test and Delivery Order. The tenderer must also include other additional documents as proof if requested by UiTM.
|
Ya
Tidak
|
|
|
III. The tenderer must provide training for configuration, operation and maintenance of the system which must cover OS & System administration during installation process for UiTM’s personnel if needed.
|
Ya
Tidak
|
|
|
10. WARRANTY
|
-
|
|
|
I. THREE (3) years of maintenance support consists of equipment faulty replacement (Next Business Day) and software upgrade shall be provided. Please provide Letter of Warranty (LoW) from principle. ** PLEASE DO NOT DISCLOSED COMPANY INFORMATION BY ERASING THE INFORMATION RELATED TO COMPANY (NAME, LOGO, REGISTRATION NUMBER, ETC)
|
Ya
Tidak
|
|
|
II. The tenderer shall be responsible for the installation, test-run and commissioning of the equipment and accompanying software to the satisfaction of UNIVERSITI TEKNOLOGI MARA before final acceptance. All costs on installation, commissioning and test run shall be borne by tenderer during the warranty period.
|
Ya
Tidak
|
|
|
III. Free support through fax, email, telephone must be provided during the warranty period.
|
Ya
Tidak
|
|
|
IV. Response time to attend to a problem call breakdown of equipment or component is MAXIMUM 4 hours.
|
Ya
Tidak
|
|
|
11. DELIVERY PERIOD
|
-
|
|
|
I. The delivery period MUST be within 18 weeks after the tenderer has received the Offer Letter.
|
Ya
Tidak
|
|
|
II. If there is a delay in project delivery, the tenderer must apply for an extension at least 1 month before the delivery period ends.
|
Ya
Tidak
|
|
|
12. IMPORTANT NOTICE TO TENDERER:
|
-
|
|
|
I. Any documents presented or submitted by the tenderer in this Dokumen Teknikal MUST NOT DISCLOSE ANY INFORMATION RELATED TO THE COMPANY'S NAME, LOGO, REGISTRATION NUMBER, ETC. THIS INFORMATION MUST BE ERASED AND NOT BE READABLE.
|
Ya
Tidak
|
|
Loading...