|
1. GENERAL REQUIREMENT
|
-
|
|
|
I. The scope of this project is to deliver, install, configure, testing and commissioning of a DHCP Server
Note: Please refer to UiTM Staff for detail installation locations.
|
Ya
Tidak
|
|
|
II. System setup and configuration must be performed and made good by the tenderer so that an adequate level of satisfaction and service quality are achieved.
|
Ya
Tidak
|
|
|
III. The system must support 32-bit and 64-bit applications in a single architecture. It also must confirm to standard requirements.
|
Ya
Tidak
|
|
|
IV. The tenderer needs to propose the most optimum configuration for the equipment to function well. Should any component that needs to be added, such as memory, shall be proposed by the tenderer.
|
Ya
Tidak
|
|
|
V. All proposed equivalent items shall be specified in detail in terms of technical specifications, model, version number, etc. (Please specify in details)
|
Ya
Tidak
|
|
|
VI. All other related material, components, or equipment, software and cabling are not specified but are required to ensure full integration of the above item with the proposed system requirements/application and must be provided by the tenderer without any cost to UiTM.
|
Ya
Tidak
|
|
|
VII. The delivery period must be within 18 weeks after the tenderer has received the Offer Letter.
|
Ya
Tidak
|
|
|
VIII. If there is a delay in project delivery, the tenderer must apply for an extension at least 1 month before the delivery period ends.
|
Ya
Tidak
|
|
|
2. TECHNICAL REQUIREMENT
|
-
|
|
|
I. PROCESSOR
|
-
|
|
|
A ) At Least One Intel Xeon E-2400 series processor with up to 8 cores or One Intel Pentium G7400/G7400T processor with 2 cores or better.
|
Ya
Tidak
|
|
|
II. MEMORY
|
-
|
|
|
A ) Support 4 DDR5 DIMM slots, supports UDIMM 128 GB max, speeds up to 4400 MT/s
|
Ya
Tidak
|
|
|
B ) Supports unregistered ECC DDR5 DIMMs
|
Ya
Tidak
|
|
|
III. STORAGE
|
-
|
|
|
A ) Up to 4 x 3.5-inch SAS/SATA (HDD/SSD) max 64 TB.
|
Ya
Tidak
|
|
|
B ) Up to 8 x 2.5-inch SAS/SATA (SSD) max 61.44 TB.
|
Ya
Tidak
|
|
|
IV. POWER SUPPLY
|
-
|
|
|
A ) Support 600W Platinum Power Supplies (100-240 VAC or 240 VDC), hot swap redundant.
|
Ya
Tidak
|
|
|
B ) Support 700 W Titanium 200 — 240 VAC or 240 VDC, hot swap redundant.
|
Ya
Tidak
|
|
|
V. I/O SLOT
|
-
|
|
|
A ) Up to two PCIe Gen4 slots on the Gen4 Riser.
|
Ya
Tidak
|
|
|
B ) One dedicated PCIe x8 slot on the system board for internal PERC.
|
Ya
Tidak
|
|
|
VI. NETWORK
|
-
|
|
|
A ) 10/100/1000BASE-T Gigabit Ethernet.
|
Ya
Tidak
|
|
|
B ) 2 X 1Gbe LOM Network Interface Controller (NIC) Ports.
|
Ya
Tidak
|
|
|
VII. OPERATING SYSTEM AND SOFTWARE
|
-
|
|
|
A ) Windows Server OS with latest version.
|
Ya
Tidak
|
|
|
B ) Support Open Source OS
|
Ya
Tidak
|
|
|
C ) System management solution to administrators effectively deploy, update, monitor, and manage servers.
|
Ya
Tidak
|
|
|
D ) The system can manage servers efficiently in physical, virtual, local, and remote environments without the need to install an agent in the operating system.
|
Ya
Tidak
|
|
|
E ) The operating system should be provided with original software media and user/technical manuals from the original software principal.
|
Ya
Tidak
|
|
|
VIII. ACCESSORIES
|
-
|
|
|
A ) Rack Support
a. Stab-in sliding rails with optional cable management arm (CMA) for 4-post racks
b. The CMA can be mounted to either side of the sliding rails without the use of tools or the need for conversion
|
Ya
Tidak
|
|
|
3. INSTALLATION, TESTING AND COMMISSIONING
|
-
|
|
|
I. Required installation, testing and commissioning on-site for the supplied package.
|
Ya
Tidak
|
|
|
II. Note that all other related material, components and cabling that are required to ensure full operation of the above package must be supplied.
|
Ya
Tidak
|
|
|
III. Any cost related to installation and configuration shall be borne by the tenderer.
|
Ya
Tidak
|
|
|
4. WARRANTY AND TECHNICAL SUPPORT
|
-
|
|
|
I. One (1) year of maintenance support consists of equipment faulty replacement (Next Business Day 8x5xNBD) and onsite service extension for two (2) years shall be provided.
|
Ya
Tidak
|
|
|
II. The tenderer MUST propose and provide a genuine product.
|
Ya
Tidak
|
|
|
III. The tenderer shall be responsible for the installation, commissioning, and test-run of the equipment and accompanying software to the satisfaction of UNIVERSITI TEKNOLOGI MARA before final acceptance. All costs on installation, commissioning, and test runs shall be borne by the tenderer.
|
Ya
Tidak
|
|
|
IV. The server shall have warranty for a period from the date of installation against defects in materials and/or workmanship.
|
Ya
Tidak
|
|
|
V. Maintenance support is needed during and after the warranty period. Tenderers must provide details of addresses of locations of after-sales service centers that shall be responsible for maintenance work for these items during the warranty period.
|
Ya
Tidak
|
|
|
VI. Free support through fax, email, or telephone must be provided during the warranty period.
|
Ya
Tidak
|
|
|
VII. The successful tenderer must be supported back-to-back by the principal to provide maintenance services for equipment supplied.
|
Ya
Tidak
|
|
|
5. SUPPORTING DOCUMENTS
TENDERER MUST PROVIDE THE FOLLOWING SUPPORTING DOCUMENTS AND MUST BE PRESENTED IN THIS DOKUMEN TEKNIKAL
** PLEASE DO NOT DISCLOSE COMPANY INFORMATION BY ERASING THE INFORMATION RELATED TO COMPANY (NAME, LOGO, REGISTRATION NUMBER, ETC) FOR ALL DOCUMENTS REQUIRED HERE.
|
-
|
|
|
I. All related catalogs and brochures shall be provided by the tenderer.
|
Ya
Tidak
|
|
|
II. The successful tenderer must be supported back to back by the principal to provide support and services for the software supplied. The tenderer should attach a Letter of Authorization (LoA) from Distributors / the Principal.
|
Ya
Tidak
|
|
|
III. The tenderer should attach a Letter of Warranty (LoW) from Distributors / Principal.
|
Ya
Tidak
|
|
Loading...