ADS-TDR-DOC-SPECTECH
  • UiTM/C1/PER/T/B/0325/0001
  • CADANGAN MEMBEKAL, MENGHANTAR, MEMASANG DAN MENGUJILARI SISTEM RANGKAIAN WiFi (FASA 2) BAGI KOLEJ KEDIAMAN PELAJAR (KMK1) UiTM CAWANGAN PAHANG KAMPUS JENGKA
  • Close Network Rack
  • RP4-C1-Network Rack - Jengka
  • 1.00 Lot

Maklumat Spesifikasi Teknikal

  
Keterangan Calit Tawaran/Catatan
1. GENERAL REQUIREMENT -
I. A total number of standing and wallmounted network Racks [14] required for this project.The list as follow :
  1. Tenderer must supply [ 2 ] of [42U] standing Network Rack
  2. Tenderer must supply [ 9 ] of [15U] Wallmounted Network Rack
  3. Tenderer must supply [ 3 ] of [4U] Wallmounted Network Rack
 Ya

Tidak
II. Tenderer must ensure the availability, operability, reliability and functionality of the supplied items component to function properly.
Ya

Tidak
III. Tenderers need to propose the optimum specification for the equipment to function and integrate well with the existing system. Should any component that needs to be added shall be proposed by the tenderer.
Ya

Tidak
IV. All other related material, components, cabling, and accessories that are required to ensure full operation and integration with new or existing equipment of the item must be provided by the tenderer
Ya

Tidak
V. Tenderer must make sure all works are done properly without any damage to the existing infra or equipment. The tenderer shall be responsible for any damage that occurs.
Ya

Tidak
VI. The proposed network rack will be integrated with all hardware purchased in this tender. The tenderer is required to integrate all items into the proposed rack system.
Ya

Tidak
VII. Tenderer must provide the network rack that includes all products pertaining to cooling, monitoring, power distribution and management among others that work in conjunction to deliver higher efficiency and availability apart from optimal capacity.
Ya

Tidak
VIII. Tenderer must ensure all network rack installations to be done by an experienced network technician.
Ya

Tidak
2. TECHNICAL REQUIREMENT -
I. 4U Wallmounted Network Rack :
  1. Network rack must be 4U height.
  2. Network rack must be minimum 600mm width in order to install new PoE switch at the specified location.
  3. Network rack must be front perforated door with cam lock
  4. Network rack must be side panel
  5. Network rack must be panel mounting members
  6. Network rack must be at least 3 gang PDU
  7. Network rack must be M6 caged nuts
  8. Network rack must be Polyester Epoxy Powder Coated Finishing (BLACK)
  9. Network rack must be rack structure using 1.0mm thick mild steel
  10. The Network Rack Must have a minimum [ 2 ] fan on top of each racks.
  11. The Network Rack shall be lockable and tenderer must provide the key to UiTM after project is complete
 Ya

Tidak
II. 42U Standing Network Rack :
  1. Network rack must be 42U height
  2. Network rack must be minimum 800mm width in order to install new PoE switch at the specified location
  3. Network rack must be front perforated door with type
  4. Network rack must have rear vented door with lock type
  5. Network rack must side panel
  6. Network rack must top cover with openings
  7. Network rack must panel mounting members (2.0mm)
  8. Network rack must fan
  9. Network rack must tray
  10. Network rack must 13A SSO power point at least 2 sets of 6 gang
  11. Network rack must M6 caged nuts
  12. Network rack must adjustable feet
  13. Network rack must castor wheels
  14. Network rack must Polyester Epoxy Powder Coated Finishing (BLACK)
  15. Network rack must Rack structure using 1.0mm thick mild steel
  16. The Network Rack Must have a minimum [ 2 ] fan on top of each racks.
  17. The Network Rack shall be lockable and tenderer must provide the key to UiTM after project is complete
 Ya

Tidak
III. 15U Wallmounted Outdoor Network Rack :
  1. Network rack must be 15U height
  2. Network rack must be minimum 500mm width in order to install new PoE switch at the specified location
  3. Network rack can be use at outdoor enviroment
  4. Network rack must be IP45 rating
  5. Network rack must be comes ventilation fan
  6. Network rack must be door with lock
  7. Network rack must be at least 3 gang PDU
  8. Network rack must be M6 caged nuts
  9. Network rack must be Polyester Epoxy Powder Coated Finishing (BLACK)
 Ya

Tidak
3. INSTALLATION, TESTING AND COMMISSIONING -
I. Tenderer is required to provide full data cabling, power cabling, connector, cable marking, installation, termination and all other accessories.
Ya

Tidak
II. Tenderer must ensure that all terminal or interface work meet UiTM requirements. Tenderer must add and bear the cost for additional accessories and extenders needed.
Ya

Tidak
III. All equipment customized brackets or panels shall be properly installed and adequate to withstand the weight of the equipment.
Ya

Tidak
IV. After the completion of all installation works, performance and function test shall be conducted
Ya

Tidak
V. The tenderer should ensure all existing network equipment /component/cabling is functioning before and after project implementation. The tenderer shall be responsible for any damage that occurs.
Ya

Tidak
VI. Tenderer should ensure all existing network equipment/component/cabling is functioning before and after project implementation. Tenderer MUST be responsible for any issue as listed above.
Ya

Tidak
VII. The tenderer shall be responsible for the installation, test run, and commissioning of the equipment and accompanying software to the satisfaction of UNIVERSITI TEKNOLOGI MARA before final acceptance. All costs on the installation, commissioning, and test run shall be borne by the tenderer during the warranty period.
Ya

Tidak
VIII. Delivery period must be within 18 weeks after tenderer has received the Offer Letter.
Ya

Tidak
IX. If there is a delay in project delivery, Tenderer must apply for extension at least 1 month before the delivery period ends.
Ya

Tidak
4. WARRANTY AND TECHNICAL SUPPORT -
I. The item shall have at least [Three (3) years] of maintenance support consists of equipment faulty replacement (Next Business Day) and software upgrade shall be provided
Ya

Tidak
II. The warranty must cover a minimum [Three (3) year] warranty.
Ya

Tidak
III. The tenderer need to attach a Letter of Authorization (LOA) from Principal/Distributor in the Dokumen Teknikal.
Ya

Tidak
IV. The tenderer need to attach a Letter of Warranty (LOW) from Principal/Distributor in the Dokumen Teknikal.
Ya

Tidak
V. Maintenance support is needed during the warranty period. Tenderer shall propose the schedule for maintenance & Services.
Ya

Tidak
VI. Free support through fax, email, and telephone must be provided during the warranty period
Ya

Tidak
5. SUPPORTING DOCUMENTS -
I. TENDERER MUST PROVIDE THE FOLLOWING SUPPORTING DOCUMENTS AND MUST BE PRESENTED IN THIS DOKUMEN TEKNIKAL
** PLEASE DO NOT DISCLOSE COMPANY INFORMATION BY ERASING THE INFORMATION RELATED TO COMPANY (NAME, LOGO, REGISTRATION NUMBER, ETC) FOR ALL DOCUMENTS REQUIRED HERE.
-
II. Tenderers must provide 3 Type Rack the following catalogues/ brochures/ technical specification manuals for the proposed network rack.
  1. [42U] standing Network Rack catalogues/ brochures
  2. [4U] Wallmounted Network Rack catalogues/ brochures
  3. [15U] Wallmounted Outdoor Rack catalogues/ brochures
 Ya

Tidak